/
Products / Synthetic waterproofing membranes
Products>>Synthetic waterproofing membranes
 Synthetic membranes for roof waterproofingALKORPLAN P 35,176 PVC membrane Alkorplan P 35176 has the following advantages: technology and easy installation, excellent mechanical properties over a wide temperature range - from -35 º C to +110 º C, vapor permeability, weather resistant and UV applicable to any type of roof, more 25 years life span, high fire resistance. Also PVC membrane Alkorplan P 35 176 is very light, making in one layer and not burden the building structure. |
 Synthetic membranes for waterproofing foundationsALKORPLAN P 35,034 PVC membrane ALKORPLAN P 35,034 is applied to exposed concrete as a separator layer using geotextiles. Lanes overlap 120 mm by impregnation of the overlapping be welded with hot air after mechanical fixing. The horizontal space is laid before the protective layer of geotextile concrete. After lifting of the vertical membrane is protected with high density polyethylene - HDPE (Tefond, Izostud) |
 Synthetic membranes for tanks for industrial and drinking waterPVC membrane ALKORPLAN P 35 052 is made from gray flexible polyvinyl chloride (PVC-P). The main use of the material is to provide waterproofing for the construction of water storage tanks of concrete or other basis. The basic requirement is the water temperature is ≤ 15 º C. The main characteristics of the material are: homogeneous geomembrane approved by almost all countries in Europe for storing drinking water drawn from a material that is in the positive list approved by the EEC for contact with potable water, the material is UV stabilized, puncture-resistant and development of root system in accordance with DIN4062 Part 1; resistant to decay and aging of bituminous mixtures unsustainable, oil and resin, they are in constant contact, compatible with polyester or polyurethane insulation, a wide capacity of adaptation to rough surfaces, very good level of applicability at constant deformation. |
 Geomembranes for hydraulic and road facilitiesPVC membrane ALKORPLAN P 35 034 is made from dull yellow / green flexible polyvinyl chloride (PVC-P) The main use of the material for waterproofing tunnels and underground hydraulic structures. The main characteristics of the material are: high resistance to permanent deformation, high puncture resistance; sustainable development of the root system in accordance with DIN4062 Part 1; resistant to decay and aging of bituminous mixtures unsustainable, oil and resin, they are in constant contact, incompatible with polyester or polyurethane insulation, a wide capacity of adaptation to uneven surfaces. |
