 Isostud Multi Protection
Izostud is a membrane of high density polyethylene (HDPE), with excellent mechanical strength, corrosion resistance and chemical reagents, durable strength to 200 KN/m2. Due to its special nodular surface IZOSTUD protect from moisture and allows continuous ventilation and drainage of covered and protected surfaces. As a result, IZOSTUD system is an ideal barrier against water, moisture, groundwater gases (Radon, etc.). and evaporation.
Used for waterproofing of walls and foundations both separately and in combination with bitumen membrane. Used as insulation for terraces, flat roofs and roof gardens as a separator layer between different materials and strengthening and stabilizing element for finishing finishing upper layers. |
 Tefond New solution for better and more robust protection
The first goal of modern construction engineering is to isolate and protect buildings with waterproof material to ensure them against access of moisture. Therefore Topic develop and create membrane of high density polyethylene TEFOND. HDPE membrane TEFOND is high density polyethylene, whose mechanical strength and resistance to corrosion are well known: it is a product which, thanks to special nodular surface allows continuous ventilation and drainage of covered and protected surfaces.
Undoubtedly TEFOND most modern system for insulation and waterproofing. Its specific surface area makes it a unique product. |
 Tefond + protection and security for double waterproofing
TEFOND PLUS (TEFOND +) is a membrane of high density polyethylene / HDPE / dual mechanical connection and a factory incorporated self-adhesive seal on joints. TEFOND PLUS is the ideal solution for protecting and waterproofing.
TEFOND PLUS is the best solution to ensure the waterproofing of walls and foundations. Self seal prevents filtration of water between the layers of the membrane covered.
Affixed flat roofs TEFOND PLUS an additional barrier against water and moisture to bituminous insulation.
For plates with direct contact with soil TEFOND PLUS is an ideal and perfect separation membrane isolation to prevent seepage from the ground. You can lay the concrete directly on TEFOND PLUS. |
 Tefond HP Waterproof and high strength
TEFOND HP is reinforced membrane extruded High Density Polyethylene / HDPE / input with double adhesive seal. Thanks to its strength TEFOND HP is the ideal product for building facilities with increased requirements for mechanical strength.
Thanks to its high quality characteristics TEFOND HP allows stabilization, waterproofing and protection of ground. |
 Maxistud Proven quality
Maxistud a technical solution in all situations requiring additional drainage permeability.
This is particularly important when Maxistud was used as bituminous membrane protection because they do not allow hydrostatic pressure on it.
With Maxistud not necessary wet processes during the laying of concrete, which in turn allows to reduce costs.
With Maxistud vegetation is prone to optimal conditions for development, easy access to water being retained in the cavities. Much water is drained, thus preventing problems from tying in.
Maxistud used for green roofs and balconies. |
 Tefond Plaster Ventilation and innovation
TEFOND PLASTER membrane is extruded from High Density Polyethylene / HDPE / combined with a strengthening layer of fiberglass, with a single physical connection. TEFOND PLASTER is a system designed for ventilation and renewal of internal walls moistened.
TEFOND PLASTER be used for renovation of the interior moist walls of old buildings. TEFOND PLASTER a protective barrier against moisture penetration. A strengthening layer of fiberglass makes it possible to put directly on the wall, eliminating problems caused by moisture. |
 Tefond Drain Drainage and protection
TEFOND DRAIN (TEFOND drain) is a membrane of high density polyethylene / HDPE /, combined with polyester geotextiles. TEFOND DRAIN has a mechanical connection with geotextile and is the ideal system for drainage of buildings.
TEFOND DRAIN perfect drainage system due to its structure draining the water at the bottom of the main wall. TEFOND DRAIN is the ideal solution even in case of high groundwater - in this case it drains water and bitumen insulation protects from damage. |
 Tefond Drain + Drainage and waterproofing
TEFOND DRAIN PLUS (TEFOND drain +) is a membrane made of extruded high density polyethylene / HDPE / dual mechanical connection and an adhesive sealant combined with polypropylene geotextile.
TEFOND DRAIN PLUS visible waterproofing retaining walls and protect them from plant roots or chemical agents. TEFOND DRAIN PLUS ensure drainage of water at the base of the wall by the air space created between the membrane and polypropylene geotextiles.
TEFOND DRAIN PLUS is ideal for roof gardens because thanks to its special structure and filter drain posed plenty of water in the soil, in extreme cases prevents the roof from damage. Thanks to its structure, mechanical strength and resistance to chemical agents, protects the waterproofing layer. |
 Tefond Accessories A complete system
High quality parameters TEFOND SYSTEM is not only due to the quality of the material which is produced membrane, but also additional special accessories to make the system gets completely finished. |
|
/
Products / HDPE membranes
